| BRAND | Grundfos |
| Product | 96039353 |
| Internal code | IMP3766679 |
| Weight | 3.17 |
| Technical specification | Kit, Stub Shaft D28/IEC132 Naimenovaniye produkta: Kit, Shaft D28/IEC132 № produkta: 96039353 EAN kod: 5700393443716 Drugoye Netto ves: 2.2 kg Massa brutto: 3.17 kg Ob"yem postavki: 3.565 cdm3 Podkhodit dlya sleduyushch. izdeliy: NB/TP Tip: KIT Развернуть 217/5000 Product Name: Kit, Shaft D28 / IEC132 Product No: 96039353 EAN Code: 5700393443716 Other Net weight: 2.2 kg Gross weight: 3.17 kg Scope of Delivery: 3.565 cdm3 Suitable for next. Products: NB / TP Type: KIT |
Please send us your request per e-mail, so we can send you our offer with competitive prices and delivery time for Grundfos - 96039353 number or any other model you need. We can offer competitive price, and delivery time with wide products distribution network in Mexico Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
PUMP (ELECTRİCAL MOTOR)
PUMP,Motor: MG 132SB2-38FF265-F1
motor pump
Priming, single-stage centrifugal pump to ISO 5199 with Dimensions and power rating according to EN 733 (10 bar). the Pump is fitted with flanges PN 16. The dimensions comply with EN 1092-2. The pump has a axial suction port and radial discharge mares as well as a horizontally arranged shaft. The process design allows disassembly of the motor, the motor lantern, the cover and the impeller without the pump housing of the Piping must be disconnected. The non-balanced rubber bellows seal complies with DIN EN 12756th The pump is directly cooled with a fan Asynchronous motor connected.
Water Pump CH4-50 3x400 V 1.32 kW 2.30 Amps
Water Pump CH4-50 3x400 V 1.32 kW 2.30 Amps
Water Pump CH4-50 3x400 V 1.32 kW 2.30 Amps
Water Pump CH4-50 3x400 V 1.32 kW 2.30 Amps
Water Pump CH4-50 3x400 V 1.32 kW 2.30 Amps
Water Pump CH12-30 3x400 V 1.53 kW 2.5 Amps
Water Pump CH4-50 3x400 V 1.32 kW 2.30 Amps
MG80A 230 / 400-2 .75KW B14-19 / save MOTOR MG80A-2-B V18 IP55 0,75KW 3X220-240 / 380-415V 50hz / -255 / 60HZ motor -440V Product No. 85805104 3-phase standard motor installation. Ambient temperature: -30 .. 40 ° C Flange size of the motor: FT100 Electrical data: Motor type: 80A IE efficiency class: IE2 number of poles: 2 Maximum Power consumption: 3.65 / 2.10 A rated motor output P2: 0.75 kW Frequency: 50 Hz nominal voltage: 3 x 220-240 D / Y 380-415 V Current: 3.30 / 1.90 A Starting current: 580-620% power factor cos phi: 0.81 to 0.71 Nominal speed: 2840-2870 rpm Rated Torque at full load: 2.5 Nm starting torque: 330 to 390% breakdown torque: 370-440 % Inertia: 0.0006 kg m² IE efficiency: 77.4% IE2 motor efficiency at full load: 81.0 % Engine efficiency at 3/4 load: 83.5 to 81.5% motor efficiency at half load: 82 to 78.5% Protection (IEC 34-5): 55 (water jets Protect / dust.) Insulation Class (IEC 85): F rotation: CW
MG112MC 3x400D-2 4.0 kW B14-28 /spare
Acc, PT100 MMS 20M CABLE RELAY 230V To monitor the temperature of submersible motors the series MS6, MS 6000 (R), MMS 6000 and MMS 8000th A Pt100 sensor enables: • continuous monitoring of the motor temperature, • Protection against too high motor temperature Monitoring and protection required by a Pt100 sensor a relay / transmitter Type PR5714, EDM 35 or transmitter Type PR 2,202th The sensor is in a special stud in the engine mounted (only MS6 and MS 6000). Motors of the MMS 6000 and MMS 8000 do not require a additional studs. The studs and the required Trigger / display are not included.
Garden Pump Jet pump JP 5, 1x230V, 1.5 m cable
MOTOR 480V,8.95-8.20/5.15-4.75A, 2.20KW, 60HZ, MOT MG100LB4-28-H3 No 87270396
CRADLE KIT - CAPACITY: 350 m³ / h
Qmax: 75lt / sec H max: 22m Tmax: 40 Degrees (no longer produced by this Ser)
Pump,centrifugal , Capacity: 30 m3 / h , 10 mSS
Capacity: 105 m3 / h ,10 mSS