BRAND | Steimel |
Product | BT1-A031R / T1-60G |
Internal code | IMP4625873 |
Custom code | 84136039 |
Technical specification | pump free shaft ATEX gear pump PTFE, GD, EC, AW, G3/4, M37GN/10+K+R, preb.f.KL (YBX469), GGK shaft Gear pumps: T1-60G according to Directive 2014/34/EU (ATEX) Item number: BT1-A031R Dimension sheet: DPP001-A031R Spare parts list (pump only): DET001-A031R Operating instructions: DBA-ZP02 + DBA-ZP-ATEX-01 Suction and discharge connection: G ¾ Material finish: Housing parts: EN-GJL-250 (EN-JL 1040) Drive and counter pinion: 16 MnCrs 5, hardened straight-toothed Shaft seal: mechanical seal M 37 GN/10+K+R Q12Q1KGG1 Elastomers of the mechanical seal: Kalrez temperature monitoring on the mechanical seals: prepared for1 PTC thermistor Display device: on-site Bearing Bushings: Bronze AW increased bearing clearance: without Case seal: Loctite other elastomers: PTFE Extraction hole: without Pumped medium: paints and varnishes solvent-based, pigment-containing, max. 100 μm grain size Concentration: 10 - 70% Viscosity: 1,000 - 2,000 mm2/s Temperature: max. 70 degrees C rinsing with solvent (viscosity 30 - 1000 mm2/s) approx. 10% of the passage of time Delivery data: Q: 0 - 300 L/h p: 0 - 3 bar (pump must suck) n: 0 - 250 rpm direction of rotation: right Test run: yes, with HLPD 46 Pre-cleaning: rinse with mineral spirits Paint: RAL 5009 (HDE) Silicone-free pump! The pump was tested with mineral oil and must be flushed on site before commissioning! Sign: EAY924-PL02 Identification plate: ETY924-D-E—PE03 ATEX marking: II 2G Ex h IIB T3 Gb X Please observe the provisions of Directive 2014/34/EU (ATEX) regarding the use of our pumps in hazardous areas. Prerequisite for operation according to: Ex zone 1 (gas), temperature class T 3, Ambient temperature -20 to 40°C Explosion group IIB. Attention: Before starting the pump, the temperature monitoring can be connected functionally! |
Please send us your request per e-mail, so we can send you our offer with competitive prices and delivery time for Steimel - BT1-A031R / T1-60G number or any other model you need. We can offer competitive price, and delivery time with wide products distribution network in Mexico Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Pump aggregat
pump
pump STML99027
2 BAR
Gear pump unit
Gear pump unit
GEAR PUMP
Gear pump
Gear pump unit
gear pump
Zahnradpumpe, 2-16 bar
gear pump
Gear pump unit
rotary gear pump without motor and gear box
gear pump
Impeller (Water Pump)
Gear pump
Antriebsritzel SF 3/32, opti.16MnCrS5, flankengeschliffen
Counterpinion SF 3/32, noise opti.16MNCRS5, flanked
Versandverpackung EUR-Palette 120 x 80 cm
Frachtkosten DAP Pfullingen
Ersatz für Fabr.-Nr. 96-1163-1 jedoch ohne Kupplung Laterne
Motor
SKKM4/0500P rotary piston pump
Pump
Pump
Zahnradpumpenaggregat