BRAND | Grundfos |
Product | DME 60-10 B-PP/E/C-F-31QQF (96524916) |
Description | Pump |
Internal code | IMP4843256 |
Please send us your request per e-mail, so we can send you our offer with competitive prices and delivery time for Grundfos - DME 60-10 B-PP/E/C-F-31QQF (96524916) Pump number or any other model you need. We can offer competitive price, and delivery time with wide products distribution network in Mexico Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
MOTOR 480V,8.95-8.20/5.15-4.75A, 2.20KW, 60HZ, MOT MG100LB4-28-H3 No 87270396
CRADLE KIT - CAPACITY: 350 m³ / h
Qmax: 75lt / sec H max: 22m Tmax: 40 Degrees (no longer produced by this Ser)
Pump,centrifugal , Capacity: 30 m3 / h , 10 mSS
Capacity: 105 m3 / h ,10 mSS
WASTE WATER SUBMERSIBLE FLOAT
Vertical, single-stage submersible motor pump with -blockage, hardened cutting system. Adjustable hydraulics to maintain the Efficiency, system "SmartTrim". Block unit with transport handle and 10m cable with free cable end. Cable entry: Edelstahlsteckverschraubung, Cable sealed waterproof, pump motor to 180 ° rotatable. Motor with 2 sets of thermocouples for temperature monitoring in the winding. double sealing system a compact Cartridge-/Patronendichtung. Oil chamber stuffed with physiologically harmless Special oil from outside controllable. Service-friendly stainless steel strap for rapid separation of the engine and hydraulics.
amperometric sensor for p/N 91835823
Sewage Lifting Pump
Grundfos submersible sewage pump Single-stage monobloc unit with single-vane impeller (SL1) or Super Vortex impeller (SLV) for wet installation with Carrying handle. Double sealing system in a compact Cartridge-/Patronendichtung. Oil chamber filled with physiologically acceptable Special oil, controllable from outside. Motor with 2 sets of thermal switches for Temperature sensors in the stator. Pump for submerged S1 operation, or intermittent duty S3 40% at 50% immersed motor.
PUMP,SUB,GRUNDFOS#SP17-4NE,5HP MOTOR
PUMP/MOTOR,SUB,GRUNDFOS#SP30-14N-30HP
(Multistage submersible pump Stainless StahlDIN mat 1.4401 for horizontal / vertical Installation with Ansaugspirale. Built-in check valve (not for SP-NE) suitable for pumping clean, highly fluid and not aggressive media without solid particles or fibers.)
Pump and MOTOR,460V, 60HZ, 3-PH, 3500RPM, SUBMERSIBLE ELECTRIC MOTOR, CLASS F INSULATION, STAINLESS STEEL MATERIAL TO 904L STAINLESS STEEL, NATURAL RUBBER NECK RINGS, VALVE SEAT AND INTERMEDIATE BEARINGS, WITH ONE LENGTH 40 METER (4X6MM2) OIL RESISTANT NEOPRENE CABLE.
Multistage submersible pump Stainless StahlDIN mat.-no. 1.4301 for horizontal / vertical Fitted with intake helix. Built-in check valve (not for SP-NE) suitable for pumping clean, thin liquid and non- aggressive media without fixed or long-fiber constituents
pump
18,5KW MOTOR
water pump