| BRAND | ProMinent |
| Product | GMXA0715SST10000UA1000BDE |
| Description | magnetic dosing pump |
| Internal code | IMP4964481 |
| Custom code | 84135040 |
| Technical specification | GMXA magnetic dosing pump GAMMA_X The gamma X is a user-friendly magnetic Diaphragm dosing pump which for a trouble-free Dosing process ensures. The integrated pressure measurement with display In addition to providing greater safety through compensation of pressure fluctuations in the process for optimal chemical consumption. Total output range of the series: 2.3 l/h — 45 l/h, 25 — 2 bar (flow rate/pressure see offered pump type/identification code) - Easy adjustment of the dosing rate directly in l/h or in gph - Trouble-free process flow through detection of hydraulic Defective conditions such as gas in the dosing head, “overpressure” and “no Pressure "(no or too high backpressure) - Thanks to the regulated magnetic drive for continuous Small dosage of approx. 1 ml/h is suitable — this also means Avoiding vibration damage caused by low pulsation Dosing characteristics • This saves pulsation dampers or mixers (in the low or medium performance range of the pump). - highest dosing accuracy due to compensation of Pressure fluctuations - Integrated 1 week/1 month timer - In concentration mode, direct input of the desired Final concentration for dosing tasks that are proportional to the quantity - Can be used for almost all liquid chemicals thanks to available material variants PVDF, acrylic glass, PP, PTFE and inox Technical details: ********************** • External control via potential-free contacts with pulse Translation/Reduction • Batch operation with max. 99,999 strokes/start pulse • Options include optical membrane rupture detector, external Control via mA signal, relay modules (e.g. 4-20 mA output), self-venting dosing head versions as well as Bluetooth function • Selectable connections to process control systems via BUS Interface such as PROFIBUS®, PROFINET®, Modbus or CAN bus Pump type: 0715 - 07bar; 15l/h ANS.8x5/SS12x10 Dosing head material: SS - stainless steel Seal material: T - standard membrane /PTFE seal Dosing head version: 1 - without vent; with valve spring Hydraulic connection: 0 - standard connection Membrane rupture detector: 0 - without Version: 0 - housing RAL5003/hood RAL2003 Logo: 0 - with PM logo Power stage design: U - Universal 100-240V Cable and plug: A - 2m Europe Relay function: 1 - 3-pin 230V relay Accessories: 0 - without accessories Control variant: 0 - manual+cont.m.pulseControl Dosage monitoring: 0 - dynamic dosing monitoring Remote stop (pause): B - with Bluetooth Language: DE - deutsch Approval: 01 - CE Documentation language: DE - German Frequency (Hz): 50/60Hz Voltage (V): 100-230V Power (W): 30W Protection class: IP66/NEMA4X Flow rate (l/h): 14.5l/h Back pressure (bar): 07bar |
Please send us your request per e-mail, so we can send you our offer with competitive prices and delivery time for ProMinent - GMXA0715SST10000UA1000BDE magnetic dosing pump number or any other model you need. We can offer competitive price, and delivery time with wide products distribution network in Mexico Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
gel-filled pH electrode with glass stem and PTFE ring diaphragm Typical applications: municipal and industrial waste water, drinking water, and Water, chemicals, paper making, food industry. pH range: 1..12 Terminal / thread: SN6 / PG 13.5 Temperature / Pressure: 0..80 degree C / 6 bar at least conductivity. 50 micro S / cm Installation length: 120 +/- 3mm
pH electrode
Solid electrolyte-filled pH combination electrode with glass shaft Annular gap. Typical application: waste water, drinking water, and industrial water, process chemistry, Emulsions, suspensions. pH range: 1..12 Terminal / thread: SN6 / PG 13.5 Temperature / pressure: 0..100 degrees C / max. 6..16 bar at least conductivity. 500 micro S / cm Installation length: 120 +/- 3mm Order number: 305096
PH Sensor
Sensor
pH electrode
Sensor
Solid electrolyte-filled pH combination electrode with glass shaft Annular gap. Typical application: waste water, drinking water, and industrial water, process chemistry, Emulsions, suspensions. pH range: 1..12 Terminal / thread: SN6 / PG 13.5 Temperature / pressure: 0..100 degrees C / max. 6..16 bar at least conductivity. 500 micro S / cm Installation length: 120 +/- 3mm
PH electrode Solid electrolyte-filled pH combination electrode with glass shaft Annular gap. Typical application: waste water, drinking water, and industrial water, process chemistry, Emulsions, suspensions. pH range: 1..12 Terminal / thread: SN6 / PG 13.5 Temperature / pressure: 0..100 degrees C / max. 6..16 bar at least conductivity. 500 micro S / cm Installation length: 120 +/- 3mm Order number: 305096
PH -Elektrode
Pneumatic dosing pump PNDb Series: PNDb Pneumados B - B Pump Version Pump type 1601 16 bar, 1 l / h, Conn. 6x4 Dosing head: SS stainless steel Seal material: T standard Membr./ PTFE sealing. Dosing head: 0 o.Entlüftung, o.Ventilfeder Hydraul. connection: 0 standard connection Design (logo): 0 with PM Logo Power outlet: 0 terminal G1 / 4, air pressure 6 bar Control Type / Anst: 0 single acting (Standard) Admission: 01 CE Air pressure: 6 BAR Flow rate: 1.0L / H
Absorption Basket Strainer
Absorption Basket Strainer
RH electrode
ORP sensor
ORP sensor
pH probe
Diaphragm Metering Pump max. 120 L/h @ max. 4 bar
Sigma 1 Base Type: S1Ba Sigma 1 base type Engine type: H Main power Pump type: 04120 4 bar, 120 l / h Dosing head: PV PVDF Sealing material: T PTFE seal Positive displacement element: S S. membrane rupture indicator opti. Dosing head: 0 o.Überströmventil, o.Ventilf. Hydraulic Conn: 7 nights Mother &. S-spout PVDF Version: 0 With PM-Logo Electrical connection: S 3ph. 230 / 400V 50 / 60Hz (WBS) Motor version: 0 IP55 (Standard) ISO class F Stroke sensor: 0 No stroke sensor Auto Hublängeneins. 0 stroke length manually Admission: 01 CE Frequency: 50 / 60Hz Voltage: 230 / 400V Power: 0.09KW Protection: IP55 Flow rate: 120 / 144l / h Back pressure: 4 bar
Series: S1CB Sigma Control Type 1 Version B Engine type: H Main power Pump type: 04084 4 bar, 101 l / h Dosing head: PV PVDF Sealing material: T PTFE seal Positive displacement element: S multi-layer membrane opt. Ad Dosing head: 0 o.Entlüftung, o.Ventilf. Hydraulic Conn: 0 Standard Version: 0 With PM-Logo El. Spannungsversorg: U 1ph, 100-240V, 50 / 60Hz, 110W Cables and connectors: A 2m Europe Relay function: 0 without relay Control variant: 1 Manual + Cont + p.c. + Analog + Dos.pr. Overpressure shutdown: 0 without overpressure shutdown Operating unit: S HMI (0.5m cable) Access Code: 1 m. Zugangskontr. Ü.-awake. dyn. Languages: English EN Admission: 01 CE Frequency: 50 / 60Hz Voltage: 100-240V Power: 110W Protection: IP65 Flow rate: 101l / h Back pressure: 4 bar
Identcode: S1CBH12017PVTS110UA110S0DE Series: S1CB Sigma Control Type 1 Version B Engine type: H Main power Pump type: 12017 12 bar, 21 l / h Dosing head: PV PVDF Sealing material: T PTFE seal Positive displacement element: S multi-layer membrane opt. Ad Dosing head: 1 o.Entlüftung, m.Ventilf. Hydraulic Conn: 1 O Mother &. E-Part PVC Version: 0 With PM-Logo El. Spannungsversorg: U 1ph, 100-240V, 50 / 60Hz, 110W Cables and connectors: A 2m Europe Relay Function: 1 fail safe relay (Leistungsrel.) Control variant: 1 Manual + Cont + p.c. + Analog + Dos.pr. Overpressure shutdown: 0 without overpressure shutdown Operating unit: S HMI (0.5m cable) Access code:. 0 o Zugangskontr. Ü.-awake. dyn. Languages: DE German Admission: 01 CE Frequency: 50 / 60Hz Voltage: 100-240V Power: 110W Power: 110W Protection: IP65 Flow rate: 21l / h Back pressure: 12bar
D 8x5 mm PE, max. 10bar
generator
Dulcometer dosing pump, 12,3 lt/h 1,5 bar