Buy PREMASGARD 7110-I LCD/ 1301-7112-4110-100 from S+S REGELTECHNIK in Mexico

BRAND S+S REGELTECHNIK
Product PREMASGARD 7110-I LCD/ 1301-7112-4110-100
Internal code IMP4974844
Technical specification Power consumption < 2 VA/ 24 V DC, < 3.5 VA/ 24 V AC 15... 36 V DC power supply depending on the load, residual ripple stabilized ± 0.3 V Burden Ra (ohms) = (Ub -14 V)/0.02 A with I variant Circuit type 2 or 3-wire connection Measurement ranges Multi-range switching with 8 switchable measurement ranges Media temperature —20... +50 °C Pressure type differential pressure Zero-point offset < ± 0.7% EW ± 1.4% EW at pressure ranges < 250 Pa Over -/under pressure max. ± 100 hPa Medium clean air and non-aggressive, non-combustible gases Switchable signal filtering 1 s/ 10 s electrical connection 2 or 3-wire connection 0.14 - 1.5 mm², via screw terminal Case dimensions 126 x 90 x 50 mm (Tyr 2) M 16 x 1.5 cable connector; with strain relief Dimensions 126 x 90 x 50 mm (Tyr 2) Pressure range ±100Pa sum of liniarity+hysteresis < ± 1% EW ± 2% EW at pressure ranges < ± 250 Pa output 4... 20 mA Temp. drift values ± 0.1 %/ °C ± 0.3 %/ °C at pressure ranges < 250 Pa Humidity < 95% RH, non-condensing air Output signal 4... 20 mA Safety class III (according to EN 60 730) Protection class IP 65 (according to EN 60 529) when installed CE conformity standards in accordance with EMC Directive 2014/ 30/EU, according to EN 61326-1, according to EN 61326-2-3 Standard pressure connection with connector for Ø 6 mm pressure hose, optionally with stainless steel quick plug connection for PVC fabric pressure hose Ø 6 mm (outer diameter) Accuracy (100 Pa): typical ± 2 Pa compared to calibrated reference device Pressure accuracy ± 2 Pa Pressure measurement range 0... +50 Pa/-50... +50 Pa 0... +100 Pa/-100... +100 Pa Cable connection Plastic cable connector (M 16 x 1.5; with strain relief, replaceable, max. inner diameter 10.4 mm) plastic housing, UV-resistant, Material polyamide, 30% glass ball reinforced, with quick-release screws (slot/cross recess combination), color traffic white (similar to RAL 9016), The cover for the display is transparent! Equipment display with lighting, three-line, cutout approx. 70 x 40 mm (W x H), to display the actual pressure as well as the setting of the automatic zero point calibration

Please send us your request per e-mail, so we can send you our offer with competitive prices and delivery time for S+S REGELTECHNIK - PREMASGARD 7110-I LCD/ 1301-7112-4110-100 number or any other model you need. We can offer competitive price, and delivery time with wide products distribution network in Mexico Industrial products Market.

WE SELL ONLY NEW AND ORIGINAL PRODUCTS!

More products of S+S REGELTECHNIK

1101-40A0-1003-000

Room temperature sensor

1301-1142-0050-200

Differential pressure transmitter

1101-1122-0219-920 (ALTM2-I)

Contact temperature Transmitter

1301-1171-0060-000

Differential pressure switch

1301-7111-4010-200

Differential pressure switch 1000 Pa / Display

1101-41A2-0000-200

Room temperature measuring transducer

1101-42A6-0000-000

room temperature transmitter

1101-7112-0049-900

Duct temperature measuring transducer

1101-7122-0049-900

Room temperature measuring transducer

1101-7122-2049-900

Duct temperature measuring transducer/Display

1101-7236-0040-000

Immersion duct temperature measuring transducer

1101-7236-4040-000

Immersion duct temperature measuring transducer/Display

1301-1142-0010-200

Differential pressure transmitter

TF65NTC20K

immersion probe

MF-15-K

Mounting flange for duct sensor

FST-1D-HR

Frost protection thermostat

PREMASGARD 2121LCD

pressure converter

RTM1-MODBUS

Room temperature transmitter

1101-1142-0009-900 / ATM2-I

Outside temperature transmitter

1101-7122-0029-900

temperature transmitter

HTF50 PT100

Sensor/ cable

1501-7110-1001-200

Surface-mounted CO2 transmitter

1101-41A2-2000-2001

Room temperature sensor

1401-6114-3100-000

Blanket movement, brightness Humidity and temperature sensors

KFTM-LQ-CO2-W

Duct CO2 transmitter

Contact us for request