Buy Type: CM5-4 E-R-A-E-AQQE J-A-A-N from Grundfos in Mexico

SQF 5A-7 Rp 1 1/2 cpl.

Kit GLRD EUHY2/HYFB2, kiEO3

Single mechanic trim A341 GM FO28

Kit, MS4000 cable RE, 4G 2.5mm2, 20m 1p Motor cable teflon coated for MS4000 RE (I) Material: Teflon plug material: Stainless steel 1.4539 Number connector 1 cable length: 20m cable cross-section: 4x2,5mm²

Kit, MS4000 cable RE, 4G 2.5mm2, 50m 1p Kit, MS4000 cable RE, 4G 2.5mm2, 50m 1p Motor cable teflon coated for MS4000 RE (I) Material: Teflon plug material: Stainless steel 1.4539 Number connector 1 cable length: 50m cable cross section: 4x2,5mm²

MOTOR CABLE WITH 4X6MM2 1STECKER 5M LONG, free cable end. MS 6000R (RI). delivery packed up.

380 V-1401 RPM-0.25KW

Ground support ring DN65 cpl. EAN number: 5700396637877 installation: Connection: DIN Rated Pressure (bar): PN 10 Number of manifold: 1 Size of the manifold: DN 65/2 1/2 " Number of Seals: 1 Number ground support rings: 1 Size of the NN: DN 65 Number of Bolts: 8 Size of the screws: M16x40 Other: Suitable for the following products: SE1.50.65

Vertical Multistage Fixed Speed Pump Cast Iron/St Steel 11 kW 2 Pole IE3 Motor

10 SQ07 240 0.75 HP 1PH 200-240V 50/60HZ

(Kit, drive unit complete. CR 64-4-2)

NR1 for NB

Headpiece TP F100/D180/16 KAT HEAD PIECE TP F100/D180/16 CATAPHORESIS

Vertical Multistage Fixed Speed Pump 304 St Steel 7.5 kW 2 Pole IE3 Motor

clutch protection

(Kit plug CR / I / N32,45,64,90,120,150)

Kit, EPDM Modul for standard pump

Kit, Shaft Seal H QQEGG KB016S1

pump

pump

PUMP, THIS,15M,3M3/H,1"150 #GRUND, CRN33 Fluid Handled: HOT WATER Manufacturer: GRUNDFOS Head, Discharge: 15 M Head, Suction: ATM Flow Rate, Maximum: 3 M3/HR Model Number: CRN 3-3 Mounting: VERTICAL Net Positive Suction Head: AS PER MFR STANDARD Number of Stage: MULTISTAGE Seal, Tassel: AS PER MFR STANDARD Material, Casing: SS 316 Material, Wetted Part: SS 316 Size, Suction: 1 IN X ANSI CLASS 150 Size, Discharge: 1 IN X ANSI CLASS 150, RF END Speed: 2900 RPM Temperature, Fluid: 60 DEG C Type, Drive: ELECTRIC MOTOR Basic Data Text: C/W MOTOR AS PER SPECIFICATION BELOW. : 400VAC, 50HZ, 0.75KW, 2851RPM, 1.73A, IP 56, : CLASS F. ABB PRODUCT CODE ፦3GJP 081 310 #BSG. ABB PRODUCT TYPE: M3JP 80MA 2 EX DIIC T4.

(Vertical, multistage centrifugal pump having opposed Suction and discharge ports (in-line design), so that the Installation possible in a horizontal single pipeline is. The wetted components of the pump are made of high quality stainless steel. A cartridge seal ensures a high reliability and easier in access Maintenance and repair work. The power transmission via a clamp coupling. Pipe connection on Combined DIN ANSI JIS flanges. The pump is phase 3 with a, fan-cooled Asynchronous motor equipped with the base.)

CR5-20 A-FGJ-A-E-HQQE 3x230 / 400 50 HZ Vertical, multistage centrifugal pump having opposed Suction and discharge ports (in-line design), so that the Installation possible in a horizontal single pipeline is. The head piece and the base piece are made of cast iron and all wetted components made of stainless steel. A Cartridge seal ensures high reliability and facilitates access during maintenance and repair work. Power is transmitted via a clamp coupling. Pipe connection via combined DIN ANSI JIS flanges. The pump is phase 3 with a, fan-cooled Asynchronous motor equipped with stand.

 Kit Gleitringdicht

PUMP: CR 45-3 A-F-A-E-HQQE without MOTOR Speed for pump data: 3540 rpm Actual calculated flow: 45.2 m³/h Resulting head of the pump: 96.7 m Shaft seal: HQQE Electrical data: Motor type: 160LB IE Efficiency class: IE2 - IE3 Number of poles: 2 Rated power - P2: 18.5 kW Power (P2) required by pump 18.5 kW Mains frequency: 60 Hz

(Head piece, BEA CR45 / 64 / spare)

Dosage pump DMX 50-10 B-PVC/V/G-X-E1B1B1,

CU 200 control box f.SQF