BRAND | Pulsafeeder |
Product | W078452-TFE |
Description | GASKET |
Internal code | IMP4729323 |
Custom code | 8413 9100 |
Technical specification | O - Ring, PTFE |
Please send us your request per e-mail, so we can send you our offer with competitive prices and delivery time for Pulsafeeder - W078452-TFE GASKET number or any other model you need. We can offer competitive price, and delivery time with wide products distribution network in Mexico Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
MicroTrac cooling tower controller, Enclosure: NEMA 4X / IP65 • Dimensions: 6.44 x 3.2 in (163 x 82 mm) • Power Supply: 90 VAC / 50/60Hz / 5A; 250 VAC / 50/60Hz / 5A • Control Output: Line Voltage @240VA per Relay (2 Amps @ 120VAC) • Display: LCD • Set Point Range: 0 – 9,999 μS/cm • Set Point Differential (Hystersis): Fixed 5% below the set point
Flat Pulsar
Controller, Microtrac, 230 Volt for Water Treatment in cooling towers
Tag.No/SR No/Model No: MP-RW641-P062/N.A/18AM02 MP-RW641-P058/N.A/RPHB EM80-315/2 MP-RW641-P064/N.A/18AM02 PR Number: 11422830 RMC RTF-MEC 6 2000305469 RING, RETAINING Parts for gear pumps: Drawing & Item Number: GMH6-ACE-KLP/11 MANUFACTURER: PULSAFEEDER MANUFACTURER: ROPER PUMPS Old part number: 46710 Old part number: 46711
Diaphragm Metering Pump, Pulsa Series 880, Model # 880-S-E, Pump Head from StSt 316L, PTFE flat diaphragm, Viton O-ring seals, single ball valves, StSt 316L 6,73 Gal / hour (25,1 Liter / hour) 24,82 bar. Hydraulic Bypass Setting: 27 bar 1,125 Inch Piston, 0,5" NPT Connections, selfpriming Manual Stroke Length Control, Standard Motor (Factory Supplied), 1450 RPM, 0,5 HP, 230/400V, 3 ph, 50 Hz, Totally enclosed. Pump will be supplied with IEC 100 frame base Paint: Two Part Epoxy Green 880-S-E.. Unit weight: 40,000 kg
1). 25HJ Pulsar - this pump requires 0.25 kW. The motor mounting is by B14 flange. We can accommodate 63, 71 and 80 frames.
1). 25HJ Pulsar - this pump requires 0.25 kW. The motor mounting is by B14 flange. We can accommodate 63, 71 and 80 frames. 2). The vacuum style leak detection is no longer available. This replacement pump will be complete with pressure type leak detection.
1). 7440-S-E – this pump requires 1.1 kW to meet the maximum pressure rating. The motor mounting is by feet. I quoted the pump considering IEC 90 frame. If you need another size, please advise.
Pump-and-motor assembly Pulsafeeder metering pump model 880H-S-E, ½” X ½” female NPT port size, 316 stainless steel liquid end material, 1” dia. Teflon tube diaphragm, 1.5” piston diameter, 0.625” stroke length, 1 piece– ½” ball for each suction and discharge, capable of delivering 30 gph against 200 psig. Pump is directly coupled to a ¾-hp, 1750-rpm, 230/460-V, 3-phase, TEFC, 56-frame size, 60-Hz motor
Pump-and-motor assembly Pulsafeeder metering pump model 680-S-E, ½” X ½” female NPT port size, 316 stainless steel liquid end material, flat diaphragm, 1.125” piston diameter, 0.50” stroke length, 1 piece – ½” ball for each suction and discharge, capable of delivering 9.88 gph against 100 psig. Pump is directly coupled to a ¾-hp, 1750-rpm, 230/460-V, 3-phase, TEFC, 56-frame size, 60-Hz motor
Locking Assembly
Rectangular duct fans
Rectangular duct fans
Rectangular duct fans
Rectangular duct fans
Speed Switch for CK series
Gasket, flat.312, .093, .016, Unit weight: 0,010 kg
UNION GASKET
Hydraulic make up valve, non adjust. OBSOLETE, please use item W214696-000
Valve, assembly hydraulic bypass 2000, Unit weight: 0,200 kg
Housing seal, for Pulsafeeder metering